Search

## Light Microscopy: Comparison of Optics

Author(s): David R. Caprette, PhD
Slide Tray:
0 slides
Slide: 10 of 15
Showing Results for: optics Return to Presentation

#### Refraction

The lenses used in a compound microscope collectively magnify images by taking advantage of the refraction of light. When light enters optical glass from the air, its speed is reduced by one-third and its wavelength is shortened proportionally. When it strikes a glass surface at an angle, it not only slows but also changes direction, a property that we call refraction. The light bends because the part of the wave that strikes the glass first slows down first.

To understand the refraction of light, you might picture an automobile leaving a paved surface onto a soft shoulder. If the vehicle drives straight off the road so that both wheels hit at the same time, it slows down but does not change direction. If it hits at an angle, the first wheel to hit the soft ground slows down before the opposite wheel slows. The vehicle changes direction toward an axis that is perpendicular to the edge of the road. One side of the vehicle travels faster until both front wheels are in the mud.

When light strikes a surface of a slower transmitting medium at an angle, it changes direction toward the perpendicular axis in the same way a vehicle changes direction toward the perpendicular when it goes off the road. The opposite effect takes place when light exits a slow transmitting medium into a faster transmitting medium, such as from glass to air. In that case, the direction changes away from the perpendicular. That is, the angle of exit becomes greater. To visualize the direction change, picture what happens when an automobile drives from a muddy shoulder back onto the road surface at an angle. The first wheel to hit the road gains a better grip and encounters less resistance, pushing the vehicle more toward the same direction.